We provide the finished fence, not just the sheets. We measure the property, select the material and colour, install the posts and frame, and add matching pedestrian and vehicle gates if required.
Leave your name, phone and email. We'll confirm the rest by phone.
100%recommend on Facebook
34reviews
15+years of experience
What you get
More privacy with straightforward maintenance
Profiled-sheet fence installation covers the whole job from measurement to a finished boundary. Because a large solid surface takes higher loads, we specify posts, spacing, foundations and steel rails for the height, ground and wind exposure.
Solid boundary for greater privacy
Galvanised, coated profiled steel
Choice of profile and exterior colour
Strong steel posts and horizontal rails
Matching pedestrian and vehicle gates
Fast, tidy installation after measurement
Suitability
Do you need sheet material or a finished installed fence?
LuxAed provides the complete profiled-sheet fence: site measurement, steel frame, posts, sheet installation and matching pedestrian or vehicle gates where required.
Best for
Street boundaries, screening a yard and gates with matching infill.
Privacy
Very high, with necessary clearances at ground level and around gates.
Wind and noise
A solid surface takes high wind loads. It may slightly reduce perceived noise but is not a certified acoustic screen.
Consider
Post section, spacing, foundations and rails depend on height, ground and site exposure.
Profiled-sheet options
Sheet, frame and matching gates
▦Fence infill
Profiled-sheet fence
Coated profiled steel forms a continuous boundary. We specify the sheet profile, thickness, colour and fixing direction for the required look and exposure.
Solid infill
Coated steel
Several profiles
⇄Complete entrance
Fence and sliding gate
The sliding gate can use the same profiled-sheet infill and colour as the fence, giving the frontage one consistent appearance.
Matching infill
Sliding gate
Automation available
⛩Gate option
Profiled-sheet swing gates
Where the entrance has enough opening space, swing gates provide a straightforward matching solution. The steel frame supports the same sheet as the fence.
Two leaves
Matching colour
Manual or automated
Price a profiled-sheet fence with material and installationGet a quote →
Tallinn and Harjumaa
Profiled-sheet fence supply and installation in Tallinn and Harjumaa
We work throughout Tallinn and Harjumaa. The free measurement covers boundary length, levels, ground, wind exposure and the entrance before we price the sheets, frame, posts, fixings and gates.
Clear pricing
What affects the price
A profiled-sheet fence with materials and standard installation usually costs €70–135/m. Height, sheet specification, frame, ground, removal and gates determine the final written quotation.
Always included
Free site measurement
Installation and alignment of steel posts
Mounting rails, profiled sheet and trims
Careful treatment of corners and transitions
Final alignment and function check
24-month warranty on completed work
Affects the price
Fence length and height
Sheet profile, thickness and coating
Post and rail dimensions
Pedestrian, swing or sliding gates
Terrain, corners and removal of the old fence
We work across Harju County: Tallinn, Viimsi, Tiskre, Harku, Rae, Peetri, Jüri, Saue, Laagri, Keila. Service area →
How we work
Four steps to a finished result
1
You send an enquiry
One call or message and we take care of the process. We arrange a free site measurement.
2
We advise and quote
We recommend a material and construction for the plot and budget, with the price agreed up front.
3
We install with care
We install the fence or gate and connect automation where required, keeping you informed.
4
We hand over the result
We inspect the completed work with you and provide operating and care guidance.
Durability depends on the steel, coating, installation and site exposure. We use exterior-grade coated sheet and protect cut edges and fixings during installation.
It forms a solid visual screen. Small installation clearances remain at the ground and around gates so the structure can work correctly.
Availability varies by supplier, but common exterior colours and several sheet profiles are available. We confirm the current options with the quote.
Yes. We make pedestrian, sliding or swing gates with matching profiled-sheet infill and colour. Automation can be included with the vehicle gate.
Yes, because a solid fence takes more wind load than open mesh. We choose the post section, spacing and foundations for the height, location and ground, and assess wind exposure at the site visit.
We measure the site, specify the structure, install posts and steel rails, fix the sheets and finishing trims, and check the completed fence. Pedestrian gates, vehicle gates, automation and removal are added to the quotation where required.
With materials and standard installation, a profiled-sheet fence usually costs €70–135/m. Height, sheet thickness and coating, frame, ground, removal and gates affect the final price.
Sometimes. We first check strength, alignment, post spacing, welds and whether the structure is suitable for the site's wind loading.
It blocks direct airflow and may slightly reduce perceived noise, but it is not a certified acoustic barrier. A solid fence must be sized for wind loading.
Yes. Use solid sections towards the street or neighbour and mesh, pickets or metal bars on side and rear boundaries.
