Wind
A solid fence blocks airflow and takes higher loads. Posts and foundations for profiled sheet or close-boarded timber must be sized for an exposed site.
Choose by use case
Which fence suits your property?
Choose for more than appearance. Privacy, wind loading, maintenance, budget and ground levels determine which boundary will actually work.
Short answer
For maximum privacy, choose timber or profiled sheet. On an exposed windy site, open mesh or metal-bar fencing is usually safer. Roll mesh is normally the most economical option for a long boundary.
Choose by use case
Quick fence comparison
| Fence type | Best for | Privacy | Wind | Maintenance |
|---|---|---|---|---|
| Roll mesh | Long boundary, budget, slope | Low | Very good | Low |
| 2D/3D panel | Strength, dogs, sites | Low | Very good | Low |
| Timber | Privacy and a warm appearance | High | Medium | Regular |
| Steel picket | Design and adjustable openness | Medium–high | Medium | Low |
| Profiled sheet | Maximum visual screening | Very high | High loading | Low |
| Metal bar | Strong, open architectural boundary | Low | Very good | Low |
Use case
Answers for real use cases
Noise
A normal solid fence may remove the direct line of sight and slightly reduce perceived road noise, but it is not a certified acoustic barrier.
Privacy
Profiled sheet, close-boarded timber and double-sided steel pickets give the most screening. Mesh and metal-bar fencing remain open.
Dogs and children
A rigid 2D/3D panel with suitable mesh and height is practical. The bottom edge, gate gaps and locks also need attention.
A sloping property
Roll mesh can follow a gentle slope. Rigid panels, timber and metal are installed to the fall or stepped after the levels have been measured.
A long boundary and limited budget
Roll mesh is usually the lowest-cost choice for a large perimeter. 3D panels cost more but give a more rigid, ordered line.
Different sides of the property
Use private timber, profiled sheet or close metal slats towards the street and more open mesh along side and rear boundaries.
Gates and access
Plan the pedestrian gate, vehicle gate, automation, intercom, children, dog and everyday routes at the same time as the fence.
FAQ
FAQ
Roll mesh, welded panels and metal-bar fencing let air pass through. A solid fence must be structurally specified for the site's wind exposure.
A solid purpose-designed barrier with sufficient mass works better than an open fence, but ordinary timber or profiled sheet should not be promised as a certified acoustic screen.
Galvanised coated mesh, steel pickets, metal bars and profiled sheet generally need less regular maintenance than timber.
Yes. A common solution is a more private street frontage with economical mesh on side and rear boundaries.
A rigid 2D/3D panel is often practical, but height, mesh size, bottom clearance and the pedestrian-gate lock matter too. Correctly tensioned roll mesh can suit a calm smaller dog.
Roll mesh is normally the lowest-cost option for a long, simple boundary. Posts, corners, ground, height, gates and old-fence removal affect the final price.
A gentle line can follow the levels, while larger changes are often stepped. Measurement shows which method will stay straight and work well.
Many works can be completed year-round. The actual schedule depends on ground conditions, frost, snow, concrete work and the selected construction.
You do not have to decide alone
Tell us about privacy, budget and the site — we will suggest 2–3 suitable options.