Rigid 2D and 3D panels define the boundary, preserve daylight and handle everyday use. They suit private homes, dog enclosures, apartment properties and commercial sites.
Leave your name, phone and email. We'll confirm the rest by phone.
100%recommend on Facebook
34reviews
15+years of experience
What you get
A strong mesh fence with little maintenance
We choose a 2D or 3D panel for the required rigidity, height and mesh size. We install the posts and can add a base board, pedestrian gate and vehicle gate with matching infill.
Rigid welded 2D and 3D mesh sections
Zinc and coloured protective coating
Anthracite RAL 7016 and other colours
Good visibility and low wind loading
Galvanised fence posts, caps and clips
Dog runs and animal enclosures from welded mesh
Suitability
When should you choose 2D/3D panels?
Choose welded panels for a rigid, secure, low-maintenance boundary where visual and noise screening are not required.
Best for
Homes, dogs, apartment properties, commercial sites and matching gates.
Privacy
Low; selected areas can use a separate solid material.
Wind and noise
Lets wind through and suits exposed sites. It does not reduce noise.
Consider
Height, wire size, posts, clips and the bottom gap must suit the use case.
2D and 3D
Welded 2D and 3D mesh fences
3DWelded mesh
3D mesh fence
V-shaped folds add stiffness to the welded mesh section and give it a profiled appearance. A practical choice for homes and normal-load sites.
V-shaped folds
Practical choice
Anthracite RAL 7016
2DWelded mesh
2D mesh fence
A flat section with single vertical wires and paired horizontal wires. At comparable dimensions, 2D mesh is generally stiffer and suits higher-load areas.
Twin horizontal wire
Flat section
Higher stiffness
The 2D mesh image is a construction illustration; the 3D fence photos and gallery show real LuxAed projects.
Options
Posts, colours and other mesh solutions
▤
Fence posts
Galvanised fence posts with caps, brackets and clips. We install and source the material.
⌗
Dog runs
Dog runs and animal enclosures from rigid welded-mesh sections. Strong and safe.
◧
RAL colours
Anthracite RAL 7016, green RAL 6005, black and other coating colours.
Welded 2D and 3D mesh fences in Tallinn and Harjumaa
We install rigid welded-mesh sections for private plots, housing associations and commercial sites throughout Tallinn and Harjumaa. We measure the boundary, check level changes and specify section height, posts, clips and matching gates before quoting.
Clear pricing
What affects the price
A 3D panel fence usually costs €30–60/m with materials and standard installation, a 2D panel fence €50–85/m. For example, 50 m of 3D panel fencing costs €1,500–3,000. The from-price is for a 1.2 m high fence. The final price depends on the dimensions, materials, site conditions and any gates or removal work. After a free measurement, we provide a clear project quote.
Always included
On-site measurement
Installation of galvanised posts
Mounting of welded-mesh sections and fixings
Levelling to the terrain
Post-installation check
24-month warranty on completed work
Affects the price
Fence length and mesh-section height (1.23–2.03 m)
Mesh type (2D/3D), wire diameter and colour
Number and type of fence posts
Gates, pedestrian gates and dog runs
Terrain and removal of the old fence
We work across Harju County: Tallinn, Viimsi, Tiskre, Harku, Rae, Peetri, Jüri, Saue, Laagri, Keila. Service area →
How we work
Four steps to a finished result
1
You send an enquiry
One call or message and we take care of the process. We arrange a free site measurement.
2
We advise and quote
We recommend a material and construction for the plot and budget, with the price agreed up front.
3
We install with care
We install the fence or gate and connect automation where required, keeping you informed.
4
We hand over the result
We inspect the completed work with you and provide operating and care guidance.
3D panels have V-shaped folds that stiffen the section, while 2D mesh is flat with double horizontal wires. At comparable sizes 2D is usually stiffer, but the choice depends on how the fence will be used and your budget.
Galvanised and coated welded mesh is designed for long-term outdoor use. Service life depends on the coating, conditions and whether the surface is damaged.
Common heights range from 1.23 to 2.03 m. We select the height for boundary marking, safety or enclosing the site.
The most popular are anthracite RAL 7016 and green RAL 6005. Other coating colours are available.
Yes, we install galvanised fence posts with caps and clips and source the materials for welded mesh and other fence types.
Yes, we build dog runs and animal enclosures from rigid welded-mesh sections.
Yes, we make sliding and swing gates with the same welded-mesh infill and colour.
A 3D panel fence usually costs €30–60/m with materials and standard installation, and stiffer 2D panels €50–85/m. For example, 50 m of 3D panel fencing costs €1,500–3,000.
We consider height, mesh size, wire, bottom clearance, gates and locks. A dog enclosure and the outer boundary may need different panels.
Yes. Mesh boundaries can be combined with solid timber, profiled sheet or metal slats only where screening is needed.
